Menu Setting Summary - Epson Stylus Pro GS6000 Setup and Setup And Use Manual

114 | Printer Parts and Controls Summary

Menu Setting Summary

Press the button to enter menu mode and select the settings
Menu
summarized here.
Menu setting
PRINTER SETUP menu
SIDE MARGIN
PAPER SIZE CHECK
PAPER SKEW CHECK
PRINT NOZZLE PATTERN
HEATING TIME
FLUSH ONTO PAPER
FLUSHING FREQUENCY
114
Description
Selects the margins for the left and right sides.
0.20inch to 1.00inch (5mm to 25mm)
Selects whether the printer checks to see if the
width and top edge of the loaded media matches
data for your print job (ON is recommended to
avoid ink overspray).
Selects whether the printer alerts you if media is
not feeding straight by displaying PAPER SKEW
on the LCD display and stopping printing. If you
OFF
select , you do not receive an error even if the
print job is out of range of the loaded media.
Selects whether to automatically print the nozzle
check pattern before printing each print job or
before every tenth sheet.
OFF
ON: EVERY PAGE
ON: EVERY 10 PAGES
Selects the length of time to preheat the heaters.
(The heaters turn off after this time has passed
after turning on the printer or finishing a print job.)
OFF
10min to 240min
Selects where to perform the flushing operation
during printing.
YES to flush at the page margins (speeds up
printing by avoiding print head returns to the
flushing box; set frequency below)
NO to flush only at the flushing box
Selects how often to perform the flushing
operation at the flushing box (if YES selected
above).
5PASS for every five passes of the print head
1PASS to 999PASS