Epson Stylus Pro GS6000 Setup and Setup And Use Manual page 77

Note: If you can't insert
the cartridge smoothly,
you may have the wrong
cartridge. Check the
package and product
code. If the Check H ink
light remains on after
installing the cartridge, it
may not be inserted fully.
Caution: Do not remove
and re-insert cartridges
more often than
necessary. Doing so can
compromise the needle
valve seal and allow air to
enter the ink tubes,
causing nozzle damage.
5. Vigorously shake the new ink cartridge in its package for about five
seconds, then remove it from its package.
6. Hold the cartridge with the arrow pointing toward the printer. Then
insert the cartridge into the slot. Don't force it in.
7. Close the ink compartment cover.
The printer returns to its
Maintaining the Printer
state.
READY
77
| 77