Epson Stylus Pro GS6000 Setup and Setup And Use Manual page 81

Caution: Do not touch
the cleaning wiper or any
other internal part with
your hands to prevent oil
from your skin interfering
with head cleaning
operations.
Do not moisten the
cleaning swab with water
or it may damage the
print head.
Do not let the cleaning
swab touch any other
part of the printer or it
may stain it with ink.
Do not reuse a cleaning
swab; dirt or ink from the
swab may damage the
print head.
7. Put on a plastic glove, then use a cleaning swab to clean ink and dust
from both sides of the cleaning wiper as shown. Wipe back and forth on
the outside surface, and up and down on the inside surface.
Also clean excess ink from the top of the capping assemblies and their
rubber surrounds.
When you are finished, go to step 12.
If the cleaning wiper and capping assemblies are still not clean, go to
step 8.
8. If ink has hardened on the cleaning wiper and/or capping assemblies,
and cannot be removed with a dry cleaning swab, you need to clean
them using the optional Print Head Cleaning Kit, which includes
special cleaning fluid and a cup.
When ordering the Print Head Cleaning Kit, ask for part number
C12C890621. See page 10 for ordering information.
Maintaining the Printer
Clean the top and rubber surrounds
of both capping assemblies
81
| 81