Epson Stylus Pro GS6000 User Manual
  1. Manuals
  2. Brands
  3. Epson Manuals
  4. Printer
  5. Stylus Pro GS6000
  6. User manual
Epson Stylus Pro GS6000 User Manual

Epson Stylus Pro GS6000 User Manual

Epson printer user's guide
Hide thumbs Also See for Stylus Pro GS6000:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Service Manual, Setup and User's Manual
User's Guide
NPD3289-00

Advertisement

Table of Contents
loading

Related Manuals for Epson Stylus Pro GS6000

Summary of Contents for Epson Stylus Pro GS6000

  • Page 1 User’s Guide NPD3289-00...

  • Page 2: Copyrights And Trademarks

    Seiko Epson Corporation. The information contained herein is designed only for use with this Epson printer. Epson is not responsible for any use of this information as applied to other printers.

  • Page 3: Table Of Contents

    Introduction Printer Parts....... .9 Front section ......9 Rear section .
  • Page 4 Automatic maintenance function ..67 Cleaning the Printer ......68 Cleaning outside of the printer .

  • Page 5: Safety Instructions

    EPSON Stylus Pro GS6000 User’s Guide Safety Instructions Important Safety Instructions Read all of these instructions before using the printer. Also be sure to follow all warnings and instructions marked on the printer. Warnings, Cautions, and Notes Warnings must be followed carefully to avoid bodily injury.

  • Page 6: Handling Waste Ink

    ❏ Before using this product, please be sure to read the Material Safety Data Sheet (MSDS). You can download it at your local Epson Web site. ❏ The waste ink from the printer is industrial waste. Proper waste ink disposal in...

  • Page 7: Setting Up The Printer

    ❏ If you plan to use the printer in Germany, the building installation must be protected by a 10 or 16 amp circuit breaker to provide adequate short-circuit protection and over-current protection for the printer.

  • Page 8: Handling Ink Cartridges

    EPSON Stylus Pro GS6000 User’s Guide Handling ink cartridges Observe the following when handling the ink cartridges: ❏ Keep ink cartridges out of the reach of children. Do not allow children to drink from or handle the cartridges. ❏ Shake an ink cartridge horizontally well (about 5 seconds) before installing it for best results.

  • Page 9: Introduction

    EPSON Stylus Pro GS6000 User’s Guide Introduction Printer Parts Front section a. Front cover Prevents a user from coming in contact with the driving mechanism during the printer operation. Open the front cover when you set paper or remove jammed paper.

  • Page 10: Rear Section

    The heater (Pre Heater) to warm paper is installed. Introduction Features EPSON Stylus Pro GS6000 is a wide-format color Eco-Solvent ink jet printer that supports 64-inch roll paper. The features of this printer are described below.

  • Page 11: The Control Panel

    EPSON Stylus Pro GS6000 User’s Guide The Control Panel Buttons, Lights, and Messages You can check the ink remaining and printer status on the control panel. Buttons a. Power button Turns the printer on or off. b. Pause/Reset button ❏ Stops printing temporarily, or restarts printing if pressed when the printer is in the pause mode.

  • Page 12: Lights

    EPSON Stylus Pro GS6000 User’s Guide Lights a Power The printer is on. light Flashing The printer is: - analyzing the data - printing - cleaning - in process of turning The printer is off. b Pause light The printer is in the Menu mode.

  • Page 13: Display

    EPSON Stylus Pro GS6000 User’s Guide Display a. Messages Displays the printer status, operation, and error messages. See “Error Messages on the LCD Panel” on page 72 See “Details of Menu mode” on page 19 b. Paper Type When you select paper type (1 to 30) in the Paper Setup menu, the number you selected appears.

  • Page 14: Menu Mode

    EPSON Stylus Pro GS6000 User’s Guide Menu Mode The Menu mode enables you to make printer settings similar to those you would normally make in the software, as well as other additional settings, directly through the control panel. The control panel shows the printer information, and operations such as nozzle check can be performed using the control panel.
  • Page 15 EPSON Stylus Pro GS6000 User’s Guide 2. There are three cases depending on the items you have selected. A. When you can select a parameter Example: When selecting PRINT NOZZLE PATTERN in the Printer Setup menu Press the button to select PRINT NOZZLE PATTERN.
  • Page 16 EPSON Stylus Pro GS6000 User’s Guide C. When you want to display the printer information Example: When selecting INK LEVEL in the Printer Status menu In the Printer Status menu, press the button to select INK LEVEL. Press the button to enter the Ink Level item.

  • Page 17: Menu List

    EPSON Stylus Pro GS6000 User’s Guide Menu list Menu Item “PRINTER SETUP” on SIDE MARGIN page 19 PAPER SIZE CHECK PAPER SKEW CHECK PRINT NOZZLE PATTERN HEATING TIME FLUSH ONTO PAPER FLUSING FREQUENCY PAPER ORIGIN SETUP AUTO TAKE-UP REEL HEAD FAN...
  • Page 18 EPSON Stylus Pro GS6000 User’s Guide “PRINTER STATUS” on VERSION page 25 PRINTABLE PAGES INK LEVEL USAGE COUNT CLEAR USAGE COUNT JOB HISTORY TOTAL PRINTS EDM STATUS “NETWORK SETUP” NETWORK SETUP on page 26 IP ADDRESS SETTING IP, SM, DG SETTING...

  • Page 19: Details Of Menu Mode

    EPSON Stylus Pro GS6000 User’s Guide Details of Menu mode PRINTER SETUP Item Parameter SIDE MARGIN 5mm to 25mm (0.20inch to 1.00inch) PAPER SIZE CHECK PAPER SKEW CHECK PRINT NOZZLE PATTERN ON: EVERY PAGE ON: EVERY 10 PAGES HEATING TIME...

  • Page 20: Paper Setup

    EPSON Stylus Pro GS6000 User’s Guide Item Parameter AUTO TAKE-UP REEL HEAD FAN REGULAR CLEANING 1h, 2h, 3h, 4h, 5h, 6h, 9h, 12h, 18h, 24h INITIALIZE SETTINGS EXECUTE PAPER SETUP Item Parameter PAPER TYPE STANDARD PAPER No.1 - 30 PAPER SETUP STANDARD PAPER No.1 - 30...
  • Page 21 EPSON Stylus Pro GS6000 User’s Guide Details of PAPER SETUP After you have selected the paper number, make the following settings. To make the custom paper type settings, see the following section. “Making the Custom Paper Type Setting” on page 28...
  • Page 22 EPSON Stylus Pro GS6000 User’s Guide Item Parameter PLATEN HEATER 30°C to 50°C (86°F to 122°F) AFTER HEATER 30°C to 50°C (86°F to 122°F) The Control Panel Explanation You can set the Platen Heater temperature. The Platen Heater is located under the print heads. Set this menu to warm up ink and improve print quality.
  • Page 23 EPSON Stylus Pro GS6000 User’s Guide Item Parameter M/W ADJUSTMENT LOW A to B (Micro Weave MEDIUM A to D Adjustment) HIGH A to D EXTRA HIGH A to B PAPER SUCTION HIGH DRYING TIME 0.0sec to 10.0sec CARRIAGE DATA WIDTH...

  • Page 24: Test Print

    See “Nozzle check” on page 65 You can print the current printer status. You can print the current network status. You can print the job information saved in the printer (up to 10 jobs). You can print custom paper information registered in...

  • Page 25: Printer Status

    See “Replacing Ink Cartridges” on page 56 ❏ To ensure you receive premium print quality and to help protect your print head, a variable ink safety reserve remains in the cartridge when your printer indicates to replace the cartridge. The Control Panel Explanation You can see the firmware version.

  • Page 26: Network Setup

    You can select the method to set the IP address to the printer. When you select PANEL, IP, SM, DG SETTING appears. You can enable or disable the Bonjour setting. You can return the network settings of the printer to the factory default value. button in the...

  • Page 27: Maintenance Mode

    EPSON Stylus Pro GS6000 User’s Guide Maintenance Mode You can change the language or unit used on the display or return all the setting values to their factory default. Turn off the printer by pressing the button. Press the button while pressing and...

  • Page 28: Making The Custom Paper Type Setting

    ❏ We recommend you write down the registered number and the settings you make from step 4. ❏ You can change the registered number on your computer by using EPSON LFP Remote Panel. The Control Panel Select a print mode.
  • Page 29 EPSON Stylus Pro GS6000 User’s Guide Set the M/W Adjustment, if necessary. 1. Press the button to select M/W ADJUSTMENT, and then press the 2. Press the button to select a suitable setting for the paper. 3. Press the button.

  • Page 30: Using The Printer Software

    EPSON LFP Remote Panel via a network. EPSON LFP Remote Panel EPSON LFP Remote Panel gives the user a broad range of control over the printer, to obtain better print quality in printing. After installing the software, see its online help for detailed information.

  • Page 31: Uninstalling The Printer Software

    Restart the computer when you reinstall the communication driver. Uninstalling EPSON LFP Remote Panel EPSON LFP Remote Panel can be uninstalled from Add or Remove Programs (or Add/Remove Programs) in the Control Panel. For detailed information, see the EPSON LFP Remote Panel...

  • Page 32: Handling Paper

    EPSON Stylus Pro GS6000 User’s Guide Handling Paper Using Roll Paper This section explains how to handle the printer. Note: ❏ See the following for details about handling paper. “Paper” on page 40 ❏ Do not open the front cover during printing. If the front cover is opened, printing will be interrupted.
  • Page 33 EPSON Stylus Pro GS6000 User’s Guide Set the roll paper to the roll paper holder (Left). Note: Set the roll paper as shown below depending on the type of roll paper. ❏ Type: Coating side face-up ❏ Type: Coating side face-in Set the roll paper to the roll paper holder (Right), and then fix the fixing lever.

  • Page 34: Note For Fixing Roll Paper Holders

    EPSON Stylus Pro GS6000 User’s Guide Note for fixing roll paper holders The following phenomenon may occur depending on the usage. Phenomenon 1: The roll paper holder is fixed but the fixing lever is not pointed downward completely. (In this case, the roll paper holder on the left may interfere with the roll paper.)

  • Page 35: Setting Roll Paper

    EPSON Stylus Pro GS6000 User’s Guide Setting roll paper This section explains how to set roll paper. Turn on the printer. Caution: Do not move the paper lever during initial operation. The print head portion may touch the pressurizing roller portion, and cause a malfunction.
  • Page 36 EPSON Stylus Pro GS6000 User’s Guide Rewind the roll paper a little by rolling the flange on the roll paper holder while holding the edge of the paper, and eliminate any slack or slant. Note: ❏ If you set the roll paper free while...
  • Page 37 EPSON Stylus Pro GS6000 User’s Guide If the edge of the roll paper is set less than 5 mm from the edge of the pressurizing roller, follow the procedure below to adjust the position of the roll paper. 1) Loosen the fixing levers of the right and left roll paper holders, and move the roll paper to left or right.

  • Page 38: Setting Paper Type

    EPSON Stylus Pro GS6000 User’s Guide Setting paper type This section explains how to set up the paper type. Note: If you have not made the paper type setting in the Paper Setup menu, see the following section to set up the paper type.

  • Page 39: Replacing Roll Paper

    EPSON Stylus Pro GS6000 User’s Guide Replacing Roll Paper This section describes when and how to replace roll paper. Replace roll paper in the following situations. ❏ When the roll paper loaded in the printer runs ❏ When you want to change the paper type to...

  • Page 40: Paper

    ❏ Do not touch the print side. Moisture and oil on your hands may affect the print quality. ❏ Do not leave paper set in the printer for a long time. Some paper has a tendency to bend, causing paper jams and degradation of print quality.

  • Page 41: Paper Size / Printable Area

    EPSON Stylus Pro GS6000 User’s Guide Paper size / Printable area The supported paper size and thickness is described below. Width 300 to 1625 mm Thickness Max 0.3 mm (When Head height adjustment lever is Low) Max 1.3 mm (When Head height...

  • Page 42: Head Height Adjustment

    EPSON Stylus Pro GS6000 User’s Guide Head height adjustment Printing with high printing rate or using strongly-curved paper can cause print heads to rub. Changing the head height may allow you to avoid head rub. Follow the procedure below to change the head height.

  • Page 43: Installing Paper Holder Plates

    Using the printer with deformed paper plates may damage the grid roller or print heads. Contact your local Epson dealer. Note: If there is interference with the paper as it is fed through the printer after the paper holder plates have been installed, stop using the paper holder plates.

  • Page 44: Ejecting Paper

    EPSON Stylus Pro GS6000 User’s Guide Ejecting Paper This section explains how to eject paper after printing is finished. Cutting roll paper Cut the roll paper after printing is finished. Warning: When printing is finished, the paper guide is at high temperature.

  • Page 45: Using Auto Take-Up Reel Unit

    EPSON Stylus Pro GS6000 User’s Guide Using Auto Take-Up Reel Unit Use the Auto Take-Up Reel Unit to roll up your print so it will not be fed out onto the floor. Turn on the power of the Auto Take-Up Reel Unit.
  • Page 46 EPSON Stylus Pro GS6000 User’s Guide Take up the roll paper for one and half revolution of the take-up reel core by rolling the scroller by hand. Return the scroller releasing lever. The scroller returns to its original position. Then pull the cushioning roller down forward.

  • Page 47: Adjust Printing

    You can perform print head alignment using: ❏ EPSON LFP Remote Panel ❏ printer’s control panel Usually perform print head alignment using EPSON LFP Remote Panel. If you do not have a computer or software, use the printer’s control panel. Note: Align the print head for the paper width loaded in the printer.

  • Page 48: Adjusting Paper Feed

    EPSON Stylus Pro GS6000 User’s Guide Select a print mode. 1. Press the button to enter the Menu mode. 2. Press the button to display PAPER SETUP, and then press the 3. Press the button to display PAPER SETUP, and then press the 4.
  • Page 49 EPSON Stylus Pro GS6000 User’s Guide Perform initial adjust print. Note: If you increase the feeding length, the accuracy of the paper feed adjustment improves; however, it wastes the paper. 1. Press the button to display PAPER FEED ADJUST, and then press the 2.

  • Page 50: How To Fix The Paper Firmly

    EPSON Stylus Pro GS6000 User’s Guide Select the fine adjustment value according to the printing result in step 7. 1. Press the button to select the value. 2. Press the button to save the fine adjustment value. Press the button to return to the READY state.

  • Page 51: Options And Consumable Products

    EPSON Stylus Pro GS6000 User’s Guide Options and Consumable Products Consumable Products The following consumable products are available for use with your printer (as of June, 2008). Recommended paper For details of the recommended paper, contact your local Epson customer support.

  • Page 52: Options

    EPSON Stylus Pro GS6000 User’s Guide Options Carrying bar Name Product code Carrying bar C12C890541 See Unpacking and Setup Guide Maintenance kit Name Product code Maintenance kit C12C890611 See the following section for details of the contents of the maintenance kit.

  • Page 53: Maintenance And Move Or Transportation

    EPSON Stylus Pro GS6000 User’s Guide Maintenance and Move or Transportation Maintenance and Move or Transportation Where to Set up the Printer Instructions for placing the printer Observe the following when setting up the printer: ❏ Choose a flat and stable location that can support the printer weight (about 200 kg with the stand and Auto Take-Up Reel Unit.)

  • Page 54: Ink Cleaner (Option)

    EPSON Stylus Pro GS6000 User’s Guide Maintenance and Move or Transportation When not in use, store the tray in the empty space of the maintenance area, on the left side of the printer. Ink Cleaner (Option) Use the ink cleaner when ink around the print head or the cleaning wiper has hardened and cannot be removed with a dry cleaning stick.

  • Page 55: Disposal Of Waste Inks

    EPSON Stylus Pro GS6000 User’s Guide Maintenance and Move or Transportation Disposal of Waste Inks Dispose of waste inks when the ink drain tank is more than half full or when DRAIN TANK FULL is displayed on the LCD panel.

  • Page 56: Replacing Ink Cartridges

    EPSON Stylus Pro GS6000 User’s Guide Maintenance and Move or Transportation Replacing Ink Cartridges Note: When you replace the ink cartridges while the printer is turned off, the remaining ink cannot be detected correctly so the ink may become unusable before the Ink Check light comes on and you cannot print correctly.

  • Page 57: Replacing Ink Cartridges

    EPSON Stylus Pro GS6000 User’s Guide Maintenance and Move or Transportation ❏ Because the green IC chip has the cartridge’s own information and the ink remaining information, you can still use the ink cartridge after pulling out the ink cartridge from the printer.
  • Page 58 EPSON Stylus Pro GS6000 User’s Guide Maintenance and Move or Transportation Carefully pull the expended cartridge straight out of the slot. Warning: If ink gets on your hands, wash them thoroughly with soap and water. If ink gets into your eyes, flush them immediately with water.

  • Page 59: Replacing Flushing Pad

    EPSON Stylus Pro GS6000 User’s Guide Maintenance and Move or Transportation Replacing Flushing Pad Replace the flushing pad in the following situations: ❏ When the flushing pad becomes deformed ❏ When smears of ink appear on paper ❏ One year after replacement Turn on the printer.

  • Page 60: Regular Maintenance

    EPSON Stylus Pro GS6000 User’s Guide Maintenance and Move or Transportation Install the new flushing pad. Set the flushing pad until it clicks into place. Close the right maintenance cover firmly until it is locked. Regular Maintenance Cleaning the cleaning wiper...
  • Page 61 EPSON Stylus Pro GS6000 User’s Guide Maintenance and Move or Transportation Press the button to start Carriage Maintenance. The print head moves to the left, and the cleaning wiper moves forward. OPEN MAINT COVERS is displayed on the LCD panel.

  • Page 62: Cleaning Around The Print Head

    EPSON Stylus Pro GS6000 User’s Guide Maintenance and Move or Transportation Cleaning around the print head Clean around the print head when foreign objects, such as dust or ink causing omitted dots or ink drops are attached around the print head.
  • Page 63 EPSON Stylus Pro GS6000 User’s Guide Maintenance and Move or Transportation Confirm, using a light such as a penlight, that there are no foreign objects, such as dust or ink attached to the gray parts in the illustration below. If foreign objects, such as dust or ink are attached to the print head, remove them using the cleaning stick.

  • Page 64: Adjusting The Print Head

    You may need to adjust the print head if white lines appear in your printed data or if you notice the print quality has declined. You can perform the following printer maintenance functions for maintaining the print head in good condition to ensure the best print quality.

  • Page 65: Nozzle Check

    EPSON Stylus Pro GS6000 User’s Guide Maintenance and Move or Transportation Nozzle check This function checks the print head clogging by printing a nozzle check pattern. Perform head cleaning if you find that the nozzle check pattern is unexpectedly faint or has missing dots in the nozzle check pattern.

  • Page 66: Head Cleaning

    Note: ❏ When not using the printer for a long period (one week or more), perform head cleaning once a week. If head cleaning is not performed, the print head may get clogged.

  • Page 67: Automatic Maintenance Function

    EPSON Stylus Pro GS6000 User’s Guide Maintenance and Move or Transportation Draining the ink cleaner The message instructs you to remove the cleaning cartridges and empty the drain tank. After draining the ink cleaner, turn off the printer. It takes about 33 minutes to complete the head washing.

  • Page 68: Cleaning The Printer

    EPSON Stylus Pro GS6000 User’s Guide Maintenance and Move or Transportation Capping function Capping is a function for automatically covering the print head with a cap (lid) to prevent the print head from drying out. Capping is performed in the following situations.

  • Page 69: Cleaning Inside Of The Printer

    EPSON Stylus Pro GS6000 User’s Guide Maintenance and Move or Transportation Cleaning inside of the printer Make sure the printer is turned off and all the lights are off, and then unplug the power cord from the electrical outlet. Leave the printer for a minute.

  • Page 70: Keeping The Printer

    ❏ Do not leave the paper in the printer for a long period of time; otherwise, the roller for securing the paper may leave a mark on the surface of the paper.

  • Page 71: Transporting The Printer

    Transporting the printer When transporting the printer, the printer must be packed in the same condition as purchased. Contact your local Epson customer support. Caution: When moving or transporting the printer, keep it flat. Do not tilt it, stand it on end, or turn it upside down.

  • Page 72: Problem Solver

    Error Messages on the LCD Panel Error messages Messages are either status messages or error messages. Many common printer problems can be identified by the lights and messages on the LCD panel. See the following messages to solve problems. Error messages...
  • Page 73 See “About ink cartridges” on page 56. See “Replacing ink cartridges” on page 57 Non-genuine ink Select DECLINE (press the cartridge is installed. the ink cartridge with a genuine Epson ink This may void EPSON’s cartridge. Selecting ACCEPT (press the warranty. button) may void EPSON’s warranty.
  • Page 74 The printer fails to Restart the printer, and then update the update the firmware. firmware using EPSON LFP Remote Panel again. The paper is jammed. Remove the jammed paper. See “The paper is jammed” on page 81 Print head is locked.

  • Page 75: When The Maintenance Request Error Occurs

    When a service call has occurred, SERVICE CALL ERROR NNNN appears and the printer stops printing. Turn off the printer, and check if the carriage lock is removed. If it is removed, then check that the power cord is plugged properly into the electrical outlet or the power connector of the printer. Plug the power cord properly and then turn on the printer.
  • Page 76 Is the printer being used in an environment other than the one specified, such as in direct sunlight? When data is sent from the computer, an error occurs at the printer and nothing is printed Cause Is the type of printer selected...

  • Page 77: Paper-Related Troubleshooting

    Are you using folded, torn or rolled paper? Problem Solver What to do Use the recommended paper. For details of the recommended paper, contact your local Epson customer support. Set the paper correctly. See “Setting roll paper” on page 35 Set the roll paper correctly.
  • Page 78 Is the roll paper set correctly? Problem Solver What to do Use the recommended paper. For details of the recommended paper, contact your local Epson customer support. Set the paper straight. See “Setting roll paper” on page 35 Straighten the paper or set a new paper.

  • Page 79: Printing-Related Troubleshooting

    Use the recommended paper. When using paper other than the dedicated one, set the Paper Suction in the Paper Setup menu. For details of the recommended paper, contact your local Epson customer support. See “Details of PAPER SETUP” on page 21 What to do Set the paper correctly.
  • Page 80 Did you try head cleaning for several times? Problem Solver What to do Use the recommended paper. For details of the recommended paper, contact your local Epson customer support. Set the roll paper correctly. See “Loading roll paper” on page 32 Perform head cleaning.

  • Page 81: The Paper Is Jammed

    EPSON Stylus Pro GS6000 User’s Guide The paper is jammed When the set paper is jammed, follow the procedure below to remove it. Turn off the printer. Open the front cover. Move the print head section from the top of the paper to the right.

  • Page 82: Where To Get Help

    Where To Get Help Contacting Customer Support Before Contacting Epson If your Epson product is not operating properly and you cannot solve the problem using the troubleshooting information in your product New :Only inkjet, SPC, and Scanner products are used in this section.

  • Page 83: Help For Users In North America

    Dial: (562) 276-1300 (U.S.), or (905) 709-9475 (Canada), 6 am to 6 pm, Pacific Time, Monday through Friday. Toll or long distance charges may apply. Before you call Epson for support, please have the following information ready: ❏ Product name ❏ Product serial number ❏...

  • Page 84: Help For Users In Singapore

    EPSON Stylus Pro GS6000 User’s Guide Epson Helpdesk Epson Helpdesk is provided as a final backup to make sure our clients have access to advice. Operators on the Helpdesk can aid you in installing, configuring and operating your Epson product. Our Pre-sales Helpdesk staff can...

  • Page 85: Help For Users In Thailand

    EPSON Stylus Pro GS6000 User’s Guide Help for Users in Thailand Contact for information, support, and services are: World Wide Web (http://www.epson.co.th) Information on product specifications, drivers for download, Frequently Asked Questions (FAQ), and e-mail are available. Epson Hotline (Phone:...

  • Page 86: Help For Users In Hong Kong

    Epson Hong Kong Limited. Internet Home Page Epson Hong Kong has established a local home page in both Chinese and English on the Internet to provide users with the following information: ❏ Product information ❏...

  • Page 87: Help For Users In India

    Help for Users in the Philippines New :For all products To obtain technical support as well as other after sales services, users are welcome to contact the Epson Philippines Corporation at the telephone and fax numbers and e-mail address below: Phone: (63) 2-813-6567 Fax:...

  • Page 88: Product Information

    Depends on RIP (Raster Image Processor) specification you use. Connection requirements The connection requirements differ depending on the connection you use. See the Epson Web site for the latest supported operating system. USB connection Windows The following conditions must be met: ❏...

  • Page 89: Electrical

    EPSON Stylus Pro GS6000 User’s Guide Paper feed Friction method Paper path Roll paper Dimensions Width: 2,698 mm (106.22") Depth: 943 mm (37.11"), 1045 mm (41.14") when using Auto Take-Up Reel Unit Height: 1,267 mm (49.88") Weight Printer: Approx. 150 kg (331 lb) without...

  • Page 90: Environmental

    EPSON Stylus Pro GS6000 User’s Guide Note: ❏ The ink cartridges packaged with your printer are partly used during initial setup. In order to produce high-quality prints, the print head in your printer will be fully charged with ink. This...

  • Page 91: Standards And Approvals

    EPSON Stylus Pro GS6000 User’s Guide Standards and Approvals Safety UL 60950-1 CSA No. 60950-1 Low Voltage Directive 2006/95/EC FCC part 15 subpart B class A CAN/CSA-CEI/IEC CISPR 22 Class A AS/NZS CISPR 22 Class A EMC Directive 2004/108/EC Warning: This is a class A product.

  • Page 92: Index

    EPSON Stylus Pro GS6000 User’s Guide Index AC inlet, 9 Active indicator, 9 Adjuster, 9 After heater, 22 Automatic maintenance function, 67 Auto Take-Up Reel, 20 Auto Take-Up Reel Unit, 9 Bonjour, 26 Buttons, 11 Capping, 68 Carriage maintenance, 24...
  • Page 93 EPSON Stylus Pro GS6000 User’s Guide Paper size check, 19 Paper skew check, 19 Paper suction, 23 Paper type, 20 Plastic glove, 53 Platen, 9 Platen heater, 22 Pre heater, 21 Pressurizing rollers, 9 Printable pages, 25 Printer Status menu, 25...

Table of Contents