Using A Test Pattern - Epson SureColor SC-S70600 User Manual

EPSON SC-S70600 series/SC-S50600 series/SC-S30600 series User's Guide
❏ Enter a correction during printing and inspect the
results.
Note:
Feed Adjustment varies with the media used. Load the
media for which feed adjustment is required under the
same conditions as the actual print job. For example, if
you are using the auto take-up reel unit for printing, the
auto take-up reel unit should also be used for feed
adjustment.
Furthermore, when installing the heavy roll media
system, the media must be loaded and feed adjustment
performed again, even if once you adjust with the
standard roll media system.
Adjust the feed manually if you feel that auto feed
adjustment has not completely resolved the problem.

Using a Test Pattern

Primary and Secondary adjustments are required.
Normally the Secondary adjustment is performed after
the Primary adjustment. Primary adjustment alone
may be sufficient if you only wish to accurately print the
length of a design.
Buttons that are used in the following settings
A
After confirming that the printer is ready, press
the Menu button.
The settings menu will be displayed.
Basic Operations
B
Select Media Setup and press the Z button.
C
Use the d/u buttons to select Customize
Settings and press the Z button.
D
Use the d/u buttons to select a media setting
bank number between 1 and 30 and then press
the Z button.
Note that any settings already saved in the printer
will be overwritten.
E
Use the d/u buttons to select Feed Adjustment
and press the Z button.
F
Select Manual and press the Z button.
Primary Adjustment
G
Select Primary and press the Z button.
H
Use the d/u buttons to select a test pattern and
press the Z button twice.
The longer the pattern, the more accurate the
adjustment.
I
The printer will print a test pattern.
When printing is complete, the media will
automatically be fed to a position where the
pattern is clearly visible.
Note:
To rewind the media, press u.
J
Measure the distance between the "+" symbols.
Record either the distance between the two
center symbols or the average of the distances
between the left, center, and right symbols.
68