EPSON SC-S70600 series/SC-S50600 series/SC-S30600 series User's Guide
Inside (SC-S30600 series)
Dirt on any of the following parts may reduce print quality. Regularly clean or exchange these parts as described in the
chapters listed in the reference sections below.
A
Print head
The print head prints by moving left and right while emitting ink. We recommend that you clean the area around
this unit once a week.
"Cleaning Around the Print Head" on page 81
U
B
Media holding plate
The media holding plates prevent the media riding up and keeps fuzz on the cut edge of the media from touching
the print head. Position the plates at either side of the media before printing.
"Loading Media (SC-S30600 series)" on page 43
U
C
Cutter groove
Pass the blade of a cutter (available in the market) down this groove to cut media.
D
Pressure rollers
These rollers press down on the media during printing.
"Cleaning the Platen Heater, Pressure Rollers, and Media Holding Plates" on page 74
U
E
Platen heater
The platen heater ensures that the ink adheres evenly.
"Heating & Drying" on page 64
U
"Cleaning the Platen Heater, Pressure Rollers, and Media Holding Plates" on page 74
U
Introduction
15