Replacing The Wiper And Wiper Cleaner - Epson SureColor SC-S70600 User Manual

EPSON SC-S70600 series/SC-S50600 series/SC-S30600 series User's Guide
Note:
If you replace the waste ink bottle before being prompted
by a message in the control panel, reset the waste ink
counter using the Waste Ink Counter option in the
Maintenance menu.
"The Maintenance Menu" on page 106
U
c
Important:
Only reset the counter when replacing the waste ink
bottle. Resetting the counter before the waste ink
bottle is replaced will result in the printer being
unable to accurately track the waste ink level.
Replacing the Waste Ink Bottle
A
Remove the waste ink bottle from the waste ink
bottle holder.
Maintenance
B
Insert the waste ink tube into the mouth of the
new waste ink bottle and place the waste ink
bottle in the holder.
Tightly seal the lid on the used waste ink bottle.
c
Important:
❏ Be sure to confirm that the waste ink tube
❏ You will need the lid for the waste ink
C
Press the Z button.
D
Check again to confirm that a freshwaste ink
bottleis correctly placed and then press the
Zbutton to reset the waste ink counter. Press
Z to clear the message from the display.
Replacing the Wiper and Wiper
Cleaner
Replace the wiper and wiper cleaner as directed below:
❏ Once every six months
❏ When the front of the wiper cleaner (the absorbent
parts) start to get stained with ink
86
is inserted in the mouth of the waste ink
bottle. Ink will spill onto the surrounding
area if the tube is not inserted in the
bottle.
bottle when disposing of waste ink. Keep
the lid in a safe place; do not throw it out.