Basic Operations; Loading And Exchanging Media; Loading Media (Sc-S70600 Series/Sc-S50600 Series) - Epson SureColor SC-S70600 User Manual

EPSON SC-S70600 series/SC-S50600 series/SC-S30600 series User's Guide

Basic Operations

Loading and Exchanging
Media
The process for loading media varies with the model of
printer or type of media feeding unit used. Choose the
method suited to your particular setup.
!
Caution:
❏ The heaters and media holding plate may be
hot; observe all necessary precautions. Failure
to observe the necessary precautions could
result in burns.
❏ Be careful not to trap your hands or fingers
when opening or closing the front cover.
Failure to observe this precaution could result
in injury.
❏ Do not rub your hands along the edges of the
media. The edges of the media are sharp and
can cause injury.
c
Important:
Load media immediately before printing. The
pressure rollers may crease media left in the printer.
The media may also become wavy or curled,
causing jams or resulting in the media coming into
contact with the print head.
Note:
For information on the media that can be used in the
printer, see:
"Supported Media" on page 124
U
Loading Media (SC-S70600
series/SC-S50600 series)
The procedure for loading media varies depending on
whether you are using the installed media feeding unit
or the optional heavy roll media system.
Follow the steps below when using the supplied media
feeding unit.
Basic Operations
When the Heavy Roll Media Feeding Unit is installed,
see: U "Using the Optional Heavy Roll Media Feeding
Unit" on page 37
When the Standard Media Feeding
Unit Is Installed
This section uses the SC-S70600 series to illustrate the
process of loading media when the supplied media
feeding unit is installed.
!
Caution:
Because the media is heavy, it should not be carried
by one person. When loading or removing the
media, use at least two persons.
A
Turn on the printer by pressing the P button.
c
Important:
When white and metallic silver inks are
installed, maintenance will be performed
automatically to prevent ink accumulating in
the printer and causing clogs. Because turning
the printer off prevents maintenance being
performed, leading to printer malfunction,
we recommend that the printer not be turned
off.
B
Loosen the roll holder fixing screws and adjust
the roll holders so that the gap between the two is
wider than the media.
Center the roll supports between the roll holders.
32