Others - Epson SureColor SC-S70600 User Manual

EPSON SC-S70600 series/SC-S50600 series/SC-S30600 series User's Guide
D
If the print head is over the media, move it away
from the jam.
c
Important:
Move the print head only after removing the
media holding plates. Contact with deformed
media holding plates could damage the print
head.
E
Raise the media loading lever.
F
Pull the media to the cutter groove and use a
cutter to remove torn or creased portions.
G
Manually rewind the cut media.
H
Remove any media that remains inside the
printer.
Problem Solver
I
Turn the printer on.
c
Important:
If the printer is left off for an extended period,
the print head will be left uncapped and dry
out, and will not print properly when printing
resumes.
Turning the printer on automatically caps the
print head.
Reload the media and resume printing.
"Loading Media (SC-S70600 series/SC-S50600
U
series)" on page 32
"Loading Media (SC-S30600 series)" on page 43
U

Others

Heaters Turn off or the Optional
Additional Print Drying System Stops
The pre-, platen, and after heaters will turn off if no
o
print job is received for some time and no error occurs.
The time before the heaters turn off automatically can
be selected using the Heat Off Timer option in the
setup menu. U
The heaters will be reactivated when a print job is
received, the media loading lever is used, or another
operation involving printer hardware is performed.
An additional print drying system is supplied with the
SC-S50600 series.
The control panel display keeps
turning off.
Is the printer in sleep mode?
o
The printer enters sleep mode when the Heat Off
Timer expires and the heaters turn off. The time
before the heaters turn off can be selected in the
Printer Setup menu.
"Printer Setup Menu" on page 104
U
The heaters will be reactivated and sleep mode will
end when a print job is received, the media loading
lever is used, or another operation involving printer
hardware is performed.
118
"Printer Setup Menu" on page 104