30 www.electrolux.com
The display shows C1.
The display shows C2.
The display shows C3.
The display shows F102.
The display shows an er-
ror code that is not in this
list.
If you cannot find a solution to the prob-
lem yourself, contact your dealer or the
service centre.
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)
Problem
Possible cause
You want to start the py-
rolytic cleaning but you
did not remove the shelf
support/telescopic run-
ners.
You want to start the py-
rolytic cleaning, keep
warm or defrost function
but you did not remove
core temperature sensor
plug from the socket.
You want to start the py-
rolytic cleaning but you
did not fully close the
door.
The door lock is defec-
tive.
There is an electrical fault. • Deactivate the appli-
The necessary data for the service centre
is on the rating plate. The rating plate is
on the front frame of the appliance cavity.
Remedy
Remove the shelf sup-
port/telescopic runners.
Remove the core temper-
ature sensor plug from
the socket.
Fully close the door.
• Fully close the door.
• Deactivate the appli-
ance with the house
fuse or the safety
switch in the fuse box
and activate it again.
• If the display shows
F102 again, contact
the Customer Care De-
partment.
ance with the house
fuse or the safety
switch in the fuse box
and activate it again.
• If the display shows the
error code again, con-
tact the Customer Care
Department.
.........................................
.........................................
.........................................