Cleaning And Adjusting The Printer; Cautions To Take When Cleaning - Ricoh CL7000 - Aficio D Color Laser Printer Maintenance Manual

2. Cleaning and Adjusting the

Cautions to Take When Cleaning

R WARNING:
• Do not remove any covers or screws other than those spec-
ified in this manual. Some parts of the machine are at a high
voltage and could give you an electric shock. Also, if the ma-
chine has laser systems, direct (or indirect) reflected eye
contact with the laser beam may cause serious eye damage.
When the machine needs to be checked, adjusted, or re-
paired, contact your service representative.
• Do not take apart or attempt any modifications to this ma-
chine. There is a risk of fire, electric shock, explosion or loss
of sight. If the machine has laser systems, there is a risk of
serious eye damage.
R CAUTION:
• When removing misfed paper, do not touch the fusing section be-
cause it could be very hot.
Clean the printer periodically to maintain print clarity.
Dry wipe the exterior using a soft cloth. If dry wiping is not enough, wipe using
a soft, wet cloth that is well wrung out. If you still cannot remove the stain or
grime, use a neutral detergent, then wipe over with a well wrung wet cloth, dry
wipe, and let it dry.
Important
❒ To avoid deformation, discoloration, or cracking, do not use volatile chemi-
cals, such as benzine and thinner, or spray insecticide on the printer.
❒ If there is dust or grime inside the printer, wipe it away using a clean, dry
cloth.
Printer
29