Adjusting The Fuser For Thick Paper - Ricoh CL7000 - Aficio D Color Laser Printer Maintenance Manual

G G G G
When you have made all settings,
press { { { { On Line} } } } .
"Ready " appears on the display.
Ready
Adjusting the Fuser for Thick
Paper
If color registration shifts when using
thick paper
If color registration shifts when using thick
paper, adjust the fuser for thick paper.
Note
❒ Fuser adjustment for thick paper is
not possible if the toner has almost
run out. Carry out this adjustment
after changing the toner cartridge.
❒ Thick paper is needed to make the
adjustment. Use the thick paper
you normally use.
A A A A
Load thick paper larger than A4
K in the bypass tray. K K K
Note
❒ For details about paper sizes the
bypass tray can handle and pa-
per loading procedure, see p.39
"Paper and Other Media".
B B B B
Press { { { { Menu} } } } .
On Line Menu
Job Reset Form Feed
Power Error
"Menu" appears on the display.
C C C C
D D D D
E E E E
F F F F
Escape
#
Enter
Data In
ZDJS001N
Adjusting the Color Registration
Press { { { { U U U U } } } } or { { { { T T T T } } } } to display
"Maintenance", and then press
{ { { { Enter #} } } } .
Menu:
Maintenance
The maintenance menu appears.
Press { { { { U U U U } } } } or { { { { T T T T } } } } to display "Color
Regist.", and then press { { { { Enter #} } } } .
Maintenance:
Color Regist.
Press { { { { U U U U } } } } or { { { { T T T T } } } } to display "Fuser
Adjust", and then press { { { { Enter #} } } } .
Color Regist.:
Fuser Adjust
Make sure "Thick Paper" ap-
pears, and then press { { { { Enter #} } } } .
Fuser Adjust:
Thick paper
Limitation
❒ If the toner cartridge is almost
empty, the following message
appears on the display: (After
changing the toner cartridge,
carry out fuser adjustment for
thick paper. For details about
changing the toner cartridge,
see p.2 "Replacing the Toner
Cartridge".)
Failed
Press # to Exit
2
33