Ricoh CL7000 - Aficio D Color Laser Printer Maintenance Manual page 26

Replacing Consumables and Maintenance Kit
G G G G
Pull the lever down slightly, and
then remove the grip securing the
fuser oil unit.
1
R CAUTION:
• Touch only the handles, no other
parts. The fuser oil unit gets very
hot and will burn your hands if
you touch it.
Important
❒ Do not touch any area other
than the green felt parts.
H H H H
Hold the fusing unit handle as
shown, slowly pull the fusing
unit up, and then put it down on a
surface.
Important
❒ Do not touch the inside of the
fusing unit.
❒ When moving the fusing unit,
keep it steady, otherwise the
fuser oil unit may come off or oil
may leak.
20
I I I I
Take the new fusing unit out of
the bag and put it down on a level
surface.
J J J J
Pull the fuser oil unit (attached to
the fusing unit) out horizontally,
and then remove it.
ZHXH033J
R CAUTION:
• Keep the fuser oil unit away from
flames. There is a risk of fire or
burns.
Important
❒ To avoid getting oil on yourself,
do not touch any areas other
than the green felt parts.
K K K K
Install the fuser oil unit removed
in step
Hold the fuser oil unit as shown,
and then insert it horizontally
into the part of the fusing unit
shown below.
ZHXH810J
I I I I
in the new fusing unit.
ZHXH790J
ZHXH800J