Adjusting Image Density - Ricoh CL7000 - Aficio D Color Laser Printer Maintenance Manual

Cleaning and Adjusting the Printer

Adjusting Image Density

Adjust image density when print be-
comes hazy gray or the image looks
patchy.
Important
2
❒ Extreme settings may cause out-
put to appear dirty.
❒ Image density settings should be
made from the application or the
printer driver, whenever possible.
Note
❒ Changing image density settings
might cause deterioration in color
balance. We recommend leaving
image density at the factory de-
fault setting.
A A A A
Press { { { { Menu} } } } .
On Line Menu
Job Reset Form Feed
"Menu" appears on the display.
B B B B
Press { { { { U U U U } } } } or { { { { T T T T } } } } to display
"Maintenance", and then press
{ { { { Enter #} } } } .
Menu:
Maintenance
36
Escape
#
Enter
Power Error Data In
ZDJS001N
C C C C
Press { { { { U U U U } } } } or { { { { T T T T } } } } to display "Im-
age Density", and then press { { { { En-
ter #} } } } .
Maintenance:
Image Density
D D D D
Press { { { { U U U U } } } } or { { { { T T T T } } } } to select the col-
or you want to adjust, and then
press { { { { Enter #} } } } .
Image Density:
Black
E E E E
Press { { { { U U U U } } } } or { { { { T T T T } } } } to set the image
density value, and then press { { { { En-
ter #} } } } .
Black:
(-3 +3)
Note
❒ You can adjust image density in
seven increments, from -3 to +3.
Increasing the value makes
printout darker; decreasing the
value makes printout lighter.
To adjust another color, repeat
D E
steps and .
F F F F
Press { { { { On Line} } } } .
"Ready " appears on the display.
Ready
0