Removing Misfed Paper; Detaching The 2 Tray Finisher; Opening And Closing The Duplex Reversal Unit - Ricoh CL7000 - Aficio D Color Laser Printer Maintenance Manual

Removing Misfed Paper

If a paper misfeed occurs, an error
message appears indicating the loca-
tion of the misfed paper on the dis-
play.
❖ ❖ ❖ ❖ Misfeed Recovery
This printer has a misfeed recovery
function that sends misfed paper
to the standard tray or right cover.
Usually, you can remove the mis-
fed paper from one or other of
these trays.

Detaching the 2 Tray Finisher

There are times when you may need
to detach the 2 tray finisher from the
printer to remove misfed paper. This
section describes how to detach the 2
tray finisher.
A A A A
Hold the handle at the top of the 2
tray finisher firmly using one
hand, pull the 2 tray finisher
straight out, and let go when it
stops.
The 2 tray finisher is detached
from the printer.
B B B B
Use both hands to push it straight
back in, and let go when it clicks
into place.
The 2 tray finisher is reattached to
the printer.
Important
❒ Attach the 2 tray finisher to the
printer after closing the duplex
reversal unit.
Opening and Closing the
Duplex Reversal Unit
There are times when you may need
to detach the duplex reversal unit to
remove misfed paper. This section
describes how to detach the duplex
reversal unit.
A A A A
Push up the lock release button
and leave it in place.
ZHXH450J
Removing Misfed Paper
ZHXH350J
ZHXH770J
4
81