Configure Switch And Fabric Parameters; Configure Switch Parameters - HP StorageWorks Edge Switch 2/12 Installation Manual

Installing and Configuring the Edge Switch 2/12
2. Click Activate to save the information. The message "Your changes to

Configure Switch and Fabric Parameters

Perform this procedure to configure the following switch and fabric operating
parameters: Error Detect Time Out Value (E_D_TOV), Resource Allocation Time
Out Value (R_A_TOV), preferred domain ID, and switch priority.

Configure Switch Parameters

The switch must be set offline to configure operating parameters. To configure the
parameters:
1. Set the switch offline as follows:
2. Click Configure at the left side of the panel. The Configure panel opens with
3. Choose Switch >Parameters to display the Parameters tab
Figure 17: Switch page—Parameters tab
52
the Date/Time configuration have been successfully
activated" displays.
a. Choose Operations >Online State to display the Online State tab.
b. Click Set Offline. The message "Your changes have been
successfully activated" displays.
the Ports page displayed.
(Figure
Edge Switch 2/12 Installation Guide
17).