HP 6100 User Manual page 64

2. Repeat Step 1
Figure 31 Raising a leveler foot
1. Hex nut
3. Carefully move the rack to the installation area and position it to provide the necessary service
areas (see
To stabilize the rack when it is in the final installation location:
1. Use a wrench to lower the foot by turning the leveler foot hex nut clockwise until the caster
does not touch the floor. Repeat for the other feet.
2. After lowering the feet, check the rack to ensure it is stable and level.
3. Adjust the feet as necessary to ensure the rack is stable and level.
64 Enterprise Virtual Array hardware components
for the other feet.
Figure 30 (page 63)).
2. Leveler foot