Download Print this page
HP StorageWorks EVA8000 Disassembly Instructions

HP StorageWorks EVA8000 Disassembly Instructions

Hide thumbs Also See for StorageWorks EVA8000:

Advertisement

Quick Links

Product End-of-Life Disassembly Instructions
Product Category: Storage Enclosures
Marketing Name / Model
[List multiple models if applicable.]
Name / Model #1
HP StorageWorks EVA8000, EVA8100, 70-41138-01, 70-41138-11
Name / Model #2
HP StorageWorks EVA4000, EVA6000, EVA4100, EVA6100, 70-41138-02, 70-41138-12
Name / Model #3
Name / Model #4
Name / Model #5
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
Batteries
Mercury-containing components
Liquid Crystal Displays (LCD) with a surface greater
than 100 sq cm
Cathode Ray Tubes (CRT)
Capacitors / condensers (Containing PCB/PCT)
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
External electrical cables and cords
Gas Discharge Lamps
Plastics containing Brominated Flame Retardants
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Components and waste containing asbestos
EL-MF877-00
Template Revision A
Notes
With a surface greater than 10 sq cm
All types including standard alkaline and lithium coin
or button style batteries
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
Includes background illuminated displays with gas
discharge lamps 0
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
Quantity
of items
included
in product
Model #1 -
18
Model #2 -
16 *
Model #1 -
12
Model #2 -
6
0
0
0
0
Model #1 -
Model #2 -
0
0
0
0
0
Page 1

Advertisement

loading

Summary of Contents for HP StorageWorks EVA8000

  • Page 1 Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
  • Page 2 Components, parts and materials containing refractory ceramic fibers Components, parts and materials containing radioactive substances 2.0 Tools Required List the type and size of the tools that would typically be used to disassemble the product to a point where components and materials requiring selective treatment can be removed.
  • Page 3 Controller rear view. Power Supply Assemblies on right. Purple Power Supply latch indicated by arrow. Remove Power Supplies. Controller top view. Cover latch shown disengaged for removal. Remove cover by lifting edge of cover slightly and pull away from mating cover section prior to lifting off of enclosure..
  • Page 4 Capacitor (6 places). Remove using pry tool. Power Supply disassembly – remove 6 case screws and lift top cover . Capacitor (2 places). Remove using pry tool. Battery disassembly – insert small flat blade screwdriver to remove catches ( 3 places), and lift top cover .

This manual is also suitable for:

Storageworks eva8100Storageworks eva4000Storageworks eva6000Storageworks eva4100Storageworks eva610070-41138-02 ... Show all