7.
Repeat the process to enter the remaining password characters.
8.
Press Enter to enter the password and return to the default display.
Clearing a password
Use the following procedure to remove storage system password protection.
NOTE:
Changing a system password on the controller requires changing the password on any
HP Command View EVA with access to the storage system.
1.
Press
2.
Press
to display Change Password?
3.
Press
4.
Press
to display Clear Password.
5.
Press Enter to clear the password.
The Password cleared message will be displayed.
Power supplies
Two power supplies provide the necessary operating voltages to all controller enclosure components.
If one power supply fails, the remaining supply is capable of operating the enclosure.
Figure 23 Power supplies
1. Status indicator
3. Power supply 1
Table 22 Power supply status indicators
Status indicator
Green
Amber
Flashing amber
Blowers
Two blowers provide the cooling necessary to maintain the proper operating temperature within
the controller enclosure. If one blower fails, the remaining blower is capable of cooling the enclosure.
56
Enterprise Virtual Array hardware components
four times to scroll to the System Password menu.
to scroll to Clear Password.
Normal operation
Power supply failure
The power cord is disconnected from the power supply
2. Power supply 0
Description