HP 6100 User Manual page 52

The menu tree is organized into the following major menus:
System Info—displays information and configuration settings.
Fault Management—displays fault information. Information about the Fault Management menu
is included in
Shutdown Options—initiates the procedure for shutting down the system in a logical, sequential
manner. Using the shutdown procedures maintains data integrity and avoids the possibility
of losing or corrupting data.
System Password—create a system password to ensure that only authorized personnel can
manage the storage system using HP Command View EVA.
To enter and navigate the storage system menu tree:
1. Press any push-button while the default display is in view. System Information becomes the
active display.
2. Press
Press
Press to select the displayed menu.
Press to return to the previous menu.
NOTE: To exit any menu, press Esc or wait ten seconds for the OCP display to return to the default
display.
Table 20 (page 52)
CAUTION:
characteristics of the storage system. You should not change any setting unless you understand
how it will impact system operation. For more information on the OCP settings, contact your
HP-authorized service representative.
Table 20 Menu options within the OCP display
System Information
Versions
Host Port Config
(Sets Fabric or Direct
Connect)
Device Port Config
(Enables/disables device
ports)
IO Module Config
(Enables/disables
auto-bypass)
Loop Recovery Config
(Enables/disables recoveries)
Unbypass Devices
UUID Unique Half
Debug Flags
Print Flags
Mastership Status (Displays
controller role — master or
slave)
52 Enterprise Virtual Array hardware components
"Controller fault management" (page
to sequence down through the menus.
to sequence up through the menus.
identifies all the menu options available within the OCP display.
Many of the configuration settings available through the OCP impact the operating
Fault Management
Last Fault
Detail View
140).
Shutdown Options System Password
Restart Change Password
Power Off Clear Password
Uninitialize System Current Password
(Set or not)