Viewing A List Of Attached Devices - NETGEAR WNDR3400 - N600 Wireless Dual Band Router User Manual

The following table describes the router statistics.
Table 4-3. Router Statistics
Item Description
System Up Time The time elapsed since the router was last restarted.
Port The statistics for the WAN (Internet) and LAN (Ethernet) ports. For each port, the
screen displays:
Status The link status of the port.
TxPkts The number of packets transmitted on this port since reset or manual clear.
RxPkts The number of packets received on this port since reset or manual clear.
Collisions The number of collisions on this port since reset or manual clear.
Tx B/s The current transmission (outbound) bandwidth used on the WAN and LAN ports.
Rx B/s The current reception (inbound) bandwidth used on the WAN and LAN ports.
Up Time The time elapsed since this port acquired the link.
Poll Interval The intervals at which the statistics are updated in this screen.
• To change the polling frequency, enter a time in seconds in the Poll Interval field, and click
Set Interval.
• To stop the polling entirely, click Stop.

Viewing a List of Attached Devices

The Attached Devices table lists all IP devices that the router has discovered on the local network.
From the main menu, under Maintenance, select Attached Devices to view the table.
Figure 4-7
Using Network Monitoring Tools
N600 Wireless Dual Band Router WNDR3400 User Manual
v1.0, August 2010
4-10