Configuring Wpa, Wpa2, Or Wpa/Wpa2 Wireless Security - NETGEAR WNDR3400 - N600 Wireless Dual Band Router User Manual

Configuring WPA, WPA2, or WPA/WPA2 Wireless Security

To set up wireless security, you can either manually configure it in the Wireless Settings screen, or
you can use Wi-Fi Protected Setup (WPS) to automatically set the SSID and implement WPA/
WPA2 security (see "Using Push 'N' Connect (WPS) to Configure Your Wireless Network" on
page 2-11.
Both WPA and WPA2 provide strong data security. WPA with TKIP is a software implementation
that can be used on Windows systems with Service Pack 2 or later. NETGEAR recommends using
WPA2 with AES, which provides the strongest security. WPA2 with AES is a hardware
implementation; see your device documentation before implementing it. Consult the product
documentation for your wireless adapter for instructions for configuring WPA settings.
Note: If you use a wireless computer to configure wireless security settings, you will be
disconnected when you click Apply. If this happens, reconfigure your wireless
computer to match the new settings, or access the wireless router from a wired
computer to make further changes.
To configure WPA or WPA2 in the wireless router:
1. Log in to the wireless router at its default LAN address of http://www.routerlogin.net with
its default user name of admin and default password of password, or using whatever
password and LAN address you have chosen for the wireless router.
2. Select Wireless Settings from the main menu.
Safeguarding Your Network
N600 Wireless Dual Band Router WNDR3400 User Manual
v1.0, August 2010
2-10