Configuring Wep Wireless Security - NETGEAR WNDR3400 - N600 Wireless Dual Band Router User Manual

Configuring WEP Wireless Security

Note: If you use a wireless computer to configure wireless security settings, you will be
disconnected when you click Apply. Reconfigure your wireless computer to match
the new settings, or access the wireless router from a wired computer to make
further changes.
To configure WEP data encryption:
1. Log in to the wireless router at its default LAN address of http://www.routerlogin.net with
its default user name of admin, and default password of password, or using whatever
password and LAN address you have chosen for the wireless router.
2. From the main menu, select Wireless Settings to display the Wireless Settings screen.
Note: On this screen, you specify wireless settings for both wireless networks: the 2.4
GHz and the 5 GHz.
3. Set the Security Options for the 2.4 GHz network first by selecting the WEP radio button in
the Security Options section:
Figure 2-3
Safeguarding Your Network
N600 Wireless Dual Band Router WNDR3400 User Manual
v1.0, August 2010
2-8