NETGEAR WNDR3400 - N600 Wireless Dual Band Router User Manual page 141

Table A-1. WNDR3400 Router Default Configuration Settings (continued)
Feature
Internet connection
MAC Address
MTU Size
Local network
Router LAN IP address printed on
product label (gateway IP address)
Router subnet
DHCP server
DHCP range
Time zone
Time zone Daylight Saving time
Allow a registrar to configure this router Enabled
Wireless
Wireless communication
SSID names
Security
Broadcast SSID
Transmission speed
Country/region
RF channel
Operating mode
Data rate
Output power
Firewall
Inbound (communications coming in
from the Internet)
Outbound (communications going out
to the Internet)
a. Maximum wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput will vary. Network
conditions and environmental factors, including volume of network traffic, building materials and construction, and
network overhead, lower actual data throughput rate.
b. Configurable to 300 Mbps at 2.4GHz.
Default Configuration and Technical Specifications
N600 Wireless Dual Band Router WNDR3400 User Manual
Default Setting
Use default hardware address
1500
192.168.1.1
255.255.255.0
Enabled
192.168.1.2 to 192.168.1.254
Pacific time
Disabled
Enabled
• 2.4GHz b/g/n: NETGEAR
• 5GHz a/n: NETGEAR-5G
Disabled
Enabled
Auto a
United States in the US; otherwise varies by region
6 until region selected
Up to 300 Mbps for 5GHz and
up to 145 Mbps for 2.4GHz
Best
Full
Disabled (bars all unsolicited requests)
Enabled (all)
v1.0, August 2010
b
A-2