NETGEAR WNDR3400 - N600 Wireless Dual Band Router User Manual page 120

Table 7-2. USB Storage Advanced Settings
Fields and Buttons
Workgroup
Access Method Network
Connection
HTTP
HTTP (via internet)
FTP
FTP (via internet)
Available Share Name
Network Folders
Read/Write Access
Folder Name
Volume Name
Total/Free Space
USB Storage
N600 Wireless Dual Band Router WNDR3400 User Manual
Description
If you are using a Windows Workgroup rather than a domain, the
Workgroup name is displayed here. The name works only in an
operating system that supports NetBIOS, such as Microsoft
Windows.
Enabled by default, this connection allows all users on the LAN to
have access to the USB drive.
Disabled by default. If you enable this setting, you can type http://
readyshare.routerlogin.net/shares to access the USB drive.
Disabled by default. If you enable this setting, remote users can
type http://public IP address/shares (for example, http://
1.1.10.102/shares) or a URL domain name to access the USB
drive over the Internet. This setting supports file uploading only.
Disabled by default.
Disabled by default. If you enable this setting, remote users can
access the USB drive via FTP over the Internet. This setting
supports both downloading and uploading of files.
If only 1 device is connected, the default share name is
USB_Storage. You can click the name shown or you can type it in
the address field of your Web Browser. If Not Shared is shown, the
default share has been deleted and no other share for the root
folder exists. Click the link to change this setting.
Shows the permissions/access controls on the network folder: All -
no password (the default) allows all users to access the network
folder. The password for admin is the same one that you use to
log in to the router main menu.
Full path used by the network folder:
Volume name from the storage device (either USB drive or HDD).
Shows the current utilization of the storage device.
v1.0, August 2010
7-8