Using Push 'N' Connect (Wps) To Configure Your Wireless Network - NETGEAR WNDR3400 - N600 Wireless Dual Band Router User Manual

3. On the Wireless Setting screen, select the radio button for the WPA or WPA2 option of your
choice.
Figure 2-4
4. The settings displayed on the screen depend on which security option you select.
5. For WPA-PSK or WPA2-PSK, enter the passphrase.
6. To save your settings, click Apply.
Using Push 'N' Connect (WPS) to Configure Your Wireless
Network
If your wireless clients support Wi-Fi Protected Setup (WPS), you can use this feature to configure
the wireless router's SSID and security settings and, at the same time, connect the wireless client
securely and easily to the wireless router. Look for the
Safeguarding Your Network
N600 Wireless Dual Band Router WNDR3400 User Manual
v1.0, August 2010
symbol on your client device
2-11