NETGEAR WNDR3400 - N600 Wireless Dual Band Router User Manual page 47

2. From the main menu, select , and then click Setup Access List to display the Wireless Card
Access List screen.
Figure 3-1
3. Click Add to add a wireless device to the wireless access control list. The Wireless Card
Access Setup screen opens and displays a list of currently active wireless cards and their
Ethernet MAC addresses.
Figure 3-2
4. Adjust the list as needed for your network. You can add devices using either of the following
methods:
• If the computer is in the Available Wireless Cards table, select the radio button of that
computer to capture its MAC address.
Protecting Your Network
N600 Wireless Dual Band Router WNDR3400 User Manual
v1.0, August 2010
3-3