Table of Contents
Advertisement
Available languages
Available languages
Select tiledrying c ycle thatmatches thetype ofload youare drying. See Sensor DryorTimed
Preset Cycle S ettings charts.
SENSOR
DRY
TIMED
CYCLES
CYCLE
DRY
CYCLES
Sensor
Dry
Cycles
Sensor Dry Cycles allow
you to match the cycle to the load you are drying.
See the following
Sensor Dry Preset Cycle Settings chart.
Each cycle dries certain
fabrics
at the recommended
temperature.
A sensor detects
the moisture
in the load and automatically
adjusts the drying
time for optimal
drying.
Heavy Duty
Use this cycle to get high heat for heavyweight mixed loads, cottons and jeans.
Normal
Use this cycle to get medium heat for drying sturdy fabrics such as work clothes and sheets.
Wrinkle
Control
Use this cycle to get low heat for drying no-iron fabrics, such as sport shirts, casual business
clothes and permanent press blends.
Delicate
Use this cycle to get extra-low heat to gently dry items such as lingerie, blouses or washable
knit fabrics.
Sensor
Dry
Preset
Cycle
Settings
Sensor
Dry Cycles
Temperature
Load Type
HEAVY DUTY
High
Heavyweight
mixed loads, cottons,
jeans
NORMAL
Medium
Corduroys,
work clothes,
sheets
WRINKLE
CONTROL
low
Business casual clothes,
permanent
press, synthetics
DELICATE
Extra-kow
Eingerie,
blouses, washable
knit fabrics
Steam
Cycles
Use Steam Cycles to help smooth out wrinkles
from dry items, such as clothes
that have been
worn or clothes
that have been left in the dryer too long. When
a Steam Cycle
is selected,
the
estimated
time
remaining
display
shows the actual time remaining
in the cycle.
NOTE:
Results may vary depending
on fabric.
100% cotton
garments
with wrinkle-free
finish
may yield better results than those without.
Use of a fabric softener
sheet is not recommended
with steam cycles
as it may cause
tcmporary
staining
on the clothcs.
Rapid
Refresh
Small
Load
lhis
cycle is best for smoothing
out wrinkles
and reducing
odors from loads consisting
of one
to four dry items of wrinkle-free
cotton,
cotton-polyester
blend, common
knits and synthetic
garments.
In this cycle a small amount
of water is sprayed
into the dryer drum
after several
minutes
of tumbling
with
heat. The dryer will continue
to tumble
with heat followed
by a brief
cool down. [he
heat level and cycle time are not adjustable.
Custom
Refresh
[his cycle
is best for touching
up clothes
that have been left in the dryer too long. In this
cycle,
a small amount
of water
is sprayed into the dryer drum after several
minutes
of
tumbling
with
heat. The dryer will continue
to tumble
with
heat followed
by a brief cool
down.
The dry time and temperature
can be adjusted
for this cycle.
NOTE: Overloading
the dryer may not yield
the same results.
2 4
Advertisement
Table of Contents
