Maytag MED6600TQ - 27 Inch Electric Washer Use & Care Manual page 13

3-wire connection: Direct Wire
Use where local codes permit connecting cabinet-ground conductor to neutral wire.
Direct wire cable must have 5 ft (1.52 rn) of extra length so dryer can be moved if needed.
Strip 31/2'' (8.9 cm) of outer covering from end of cable. Strip insulation back 1" (2.5 cm). If
using 3-wire cable with ground wire, cut bare wire even with outer covering. Shape ends of
wires into a hook shape.
t"
_B.9 co)
When connecting to the terminal block, place the hooked end of time wire under the screw of
the terminal block (hook facing right), squeeze hooked end together and tighten screw, as
shown.
1,
2.
koosen or remove center silver-colored terminal block screw.
Place the hooked end of the neutral wire (white or center wire) of direct wire cable under
the center screw of terminal block (hook facing right). Squeeze hooked end together.
Tighten screw.
-t
A. [xternal ground conductor screw
B. Neutral ground wir_"
C. Ce'nter silver-colore'd terminal block scr_'vv
D. Neutral wire (white" or center wire')
E. _" (1.9 cm) UL list_'d strain r_qi_f
Place the hooked ends of the other direct wire cable wires under time outer terminal block
screws (hooks facing right). Squeeze hooked ends together. Tighten screws.
!! !!
4. Tighten strain relief screw.
5. Insert tab of terminal block cover into slot of dryer rear paneh Secure cover with hold-
down screw.
6. You have completed your electrical connection. Now go to "Venting Requirements."
Optional 3-wire connection
Use for direct wire or power supply cord where local codes do not permit connecting
cabinet-ground conductor to neutral wire.
1. Remove center silver-colored terminal block screw.
2. Remove neutral ground wire from external ground conductor screw. Connect neutral
ground wire and the neutral wire (white or center wire) of power supply cord/_ able under
center, silver-colored terminal block screw. Tighten screw.
A. Exte'rnal g,round conductor screw
B. Neutral ground wire'
C. C_'nter silv_'r-color_'d terminal block screw
D. Neutral wire (white or center wire')
E. _" ( 1.9 cm) UL listed strain relief
f. Crouncfing path determined by a qualifie'd electrician