Table of Contents
Advertisement
Available languages
Available languages
10. Using pliers, tighten
the coupling
with
an additional
two-thirds
turn.
If the dryer is not level, prop up the dryer using a wood block.
Use a wrench
to adjust the legs
up or down
and check again for levelness.
NOIE:
Do not overtighten.
Damage
to the coupling
can result.
11. Check that the water faucets
are on.
12. Check for leaks around
"Y" connector,
faucet
and hoses.
Check the levelness
of the dryer by first placing
a level on the top of the dryer near the
conso[e.
You can change your door swing from a right-side
opening
to a left-side
opening,
if desired.
1.
Place a towel
or soft cloth on top of the dryer or work space to protect
the surface.
Remove the door assembly
1.
Open
the dryer door.
2.
Remove the bottom
screw from each of the 2 hinges that attach the dryer door to the front
panel of the dryer.
3.
[oosen
the top screw from each of the 2 hinges
in Step 2.
]hen,
by placing
a level in the crease on the side of the dryer between
the top of the dryer and
the dryer cabinet,
check the levelness from front to back.
4,
A
'B
A. _oose'll
the'se'
5creq,vs.
_.
Remove"
these"
scre\,vg.
Remove the dryer door and the hinges by lifting
upward
on the door. I.ay the door on a
flat, protected
surface,
with the inside of the door facing up. Remove
remaining
2 loose
screws from dryer front panel.
18
Advertisement
Table of Contents
