5. Monitoring and Configuring the Printer
Configuring the IPsec Policy
Click the [IPsec Policy List] tab on the IPsec settings page to display the list of the registered IPsec
policies.
Item
No.
Name
Address Settings
Action
Status
To configure IPsec policies, select the desired IPsec policy, and then click [Change] to open the "IPsec
Policy Settings" page. The following settings can be made on the "IPsec Policy Settings" page.
86
IPsec policy number.
Displays the name of the IPsec policy.
Displays the IP address filter of the IPsec policy as below:
Remote address/Prefix length
Displays the action of the IPsec policy as "Allow", "Drop", or "Require
Security".
Displays the status of the IPsec policy as "Active" or "Inactive".
Description