Intel Desktop Board D845GEBV2/D845GERG2 Technical Product Specification
2.9 Jumper Blocks
CAUTION
Do not move any jumpers with the power on. Always turn off the power and unplug the power
cord from the computer before changing a jumper setting. Otherwise, the Desktop Board could be
damaged.
Figure 18 shows the location of the jumper blocks.
B
3
J9H2
Item
Description
A
Front panel audio connector/jumper block
B
BIOS Setup configuration jumper block
2.9.1 Front Panel Audio Connector/Jumper Block
This connector has two functions:
•
With jumpers installed, the audio line out signals are routed to the back panel audio line out
connector.
•
With jumpers removed, the connector provides audio line out and mic in signals for front panel
audio connectors.
72
A
2
1
9
10
J8A1
1
Figure 18. Location of the Jumper Blocks
Reference Designator
J8A1
J9H2
OM13581