Manufacturing Options - Intel D845GEBV2 - OCTOBRE 2002 Manual

Table 2. Feature Summary (continued)
BIOS
Instantly Available
PC Technology
Expansion
Capabilities
For information about
The board's compliance level with ACPI, Plug and Play, and SMBIOS

1.2.2 Manufacturing Options

Table 3 describes the manufacturing options on the Desktop Boards D845GEBV2 and
D845GERG2. Not every manufacturing option is available in all marketing channels. Please
contact your Intel representative to determine which manufacturing options are available to you.
Table 3.

Manufacturing Options

CNR
Hardware Monitor
Subsystem
10/100 LAN
10/100/1000 LAN
For information about
Available configurations for the Desktop Boards D845GEBV2 and
D845GERG2
#
INTEGRATOR'S NOTE
The LAN and the CNR manufacturing options are mutually exclusive.
• Intel/AMI BIOS (resident in the 4 Mbit FWH)
• Support for Advanced Configuration and Power Interface (ACPI), Plug and Play,
and SMBIOS
• Support for PCI Local Bus Specification Revision 2.2
• Suspend to RAM support
• Wake on PCI, CNR, RS-232, front panel, PS/2 devices, and USB ports
• D845GEBV2: Six PCI bus add-in card connectors (SMBus routed to PCI bus
connector 2)
• D845GERG2: Three PCI bus add-in card connectors (SMBus routed to PCI bus
connector 2)
One Communication and Networking Riser (CNR) connector (slot shared with
PCI bus connector 6 on the Desktop Board D845GEBV2 and with PCI bus connector
3 on the Desktop Board D845GERG2)
• Voltage sense to detect out of range power supply voltages
• Thermal sense to detect out of range thermal values
• Three fan sense inputs used to monitor fan activity
• Fan speed control
• Hardware monitoring and fan control ASIC
®
Intel 82562ET 10/100 Mbit/sec Platform LAN Connect (PLC) device
®
Intel 82540EM 10/100/1000 Gigabit Ethernet Controller (Desktop Board
D845GERG2 only)
Product Description
Refer to
Section 1.5, page 20
Refer to
Section 1.3, page 19
13