D845Gerg2 Add-In Board And Peripheral Interface Connectors; Scsi Led Connector - Intel D845GEBV2 - OCTOBRE 2002 Manual

Intel Desktop Board D845GEBV2/D845GERG2 Technical Product Specification
Item Description
A CNR (optional)
B PCI bus connector 3
C PCI bus connector 2
D PCI bus connector 1
E AGP connector
Figure 16. D845GERG2 Add-in Board and Peripheral Interface Connectors
#
INTEGRATOR'S NOTES
•
The AGP connector is keyed for 1.5 V AGP cards only. Do not attempt to install a legacy
3.3 V AGP card. The AGP connector is not mechanically compatible with legacy 3.3 V
AGP cards.
•
Not all PCI video cards can be used in PCI bus connectors 1 and 2 (the PCI bus
connectors closest to the processor). To avoid clearance problems, install PCI video
cards in PCI bus connector 3.
Table 34.

SCSI LED Connector

Pin Signal Name
1 SCSI_ACT#
2 No connect
68
A B C D E
2
1
2
1
H
I
40
39
2 34
40
39 1 33
G F
Item Description
F Diskette drive
G Primary IDE
H Secondary IDE
I SCSI LED
OM15022