2.9 Jumper Blocks
CAUTION
Do not move any jumpers with the power on. Always turn off the power and unplug the power
cord from the computer before changing a jumper setting. Otherwise, the board could be
damaged.
The board has two jumper blocks. Figure 13 shows the location of the jumper blocks.
Reference Designator
J8C2
J8D1
3
1
4
1
3
6
J8C2
J8D1
Description
BIOS configuration jumper block
USB front panel / CNR jumper block
Figure 13. Location of the Jumper Blocks
Technical Reference
OM10448
69