Front Panel Audio Connector; Auxiliary Line In Connector; Rear Chassis Fan Connector; Atapi Cd-Rom Connector - Intel D845GEBV2 - OCTOBRE 2002 Manual

Intel Desktop Board D845GEBV2/D845GERG2 Technical Product Specification
Table 25.

Front Panel Audio Connector

Pin Signal Name
1 MIC_IN
3 MIC_BIAS
5 RIGHT_OUT
7 Ground
9 LEFT_OUT
#
INTEGRATOR'S NOTE
The front panel audio connector is alternately used as a jumper block for routing audio signals.
Refer to Section 2.9.1 on page 72 for more information.
Table 26.

Auxiliary Line In Connector

Pin Signal Name
1 Left auxiliary line in
2 Ground
3 Ground
4 Right auxiliary line in
Table 27.

Rear Chassis Fan Connector

Pin Signal Name
1 (Note)
2 +12 V
3 REAR_TACH_OUT
Note: Pin 1 is Control if the Desktop Board uses the hardware monitoring and fan control ASIC.
Pin 1 is Ground if the Desktop Board uses the hardware monitoring ASIC.
Table 28.

ATAPI CD-ROM Connector

Pin Signal Name
1 Left audio input from CD-ROM
2 CD audio differential ground
3 CD audio differential ground
4 Right audio input from CD-ROM
64
Pin Signal Name
2 Ground
4 +5 V
6 RIGHT_IN
8 Key
10 LEFT_IN