Jumper Blocks; Front Panel Audio Connector/Jumper Block; Location Of The Jumper Blocks - Intel D845EPT2 Specification

Intel Desktop Board D845EBG2/D845EPT2 Technical Product Specification

2.9 Jumper Blocks

CAUTION
Do not move any jumpers with the power on. Always turn off the power and unplug the power
cord from the computer before changing a jumper setting. Otherwise, the Desktop Board could be
damaged.
Figure 16 shows the location of the jumper blocks on the Desktop Boards D845EBG2 and
D845EPT2.
1
3
A 5
7
9
3
B
Item Description
A

Front panel audio connector/jumper block

B BIOS Setup configuration jumper block
2.9.1 Front Panel Audio Connector/Jumper Block
This connector has two functions:
•
With jumpers installed, the audio line out signals are routed to the back panel audio line out
connector.
•
With jumpers removed, the connector provides audio line out and mic in signals for front panel
audio connectors.
Table 47 describes the two configurations of this connector/jumper block.
74
1
Figure 16. Location of the Jumper Blocks
Reference Designator
J8B1
J8H2
OM14243