Setting The Ps/2 And Usb Wake Configuration; Jumper Blocks - Intel D815EGEW Quick Reference

Setting the PS/2 and USB Wake Configuration

Jumper Blocks

The 3-pin PS/2 jumper block, labeled J2B1, enables ACPI wake configurations
of the two PS/2 ports. The 3-pin USB port jumper block, labeled J2B2, enables
ACPI wake configurations of the two USB ports.
The following table describes the jumper settings for configuring the PS/2 mouse
and keyboard ports.
Jumper Setting Configuration
1-2 Allows wake from ACPI state S1
1 3
2-3 Allows wake from keyboard/mouse in all ACPI states
1 3
(must also set ACPI BIOS option to S3)
1 3
None PS/2 ports will not function
14
1 3
J2B2
OM12687
Intel Desktop Board D815EGEW Quick Reference
1 3
J2B1