Turn Signal Lamp; Brake / Tail Lamp; License Plate Lamp - HYOSUNG GT 650 EFI Owner's Manual

◉ ◉ TURN SIGNAL LAMP
1. Remove the lens by removing the
screw.
2. Push the bulb, turn it to the counter-
clockwise, and pull it out.
3. After stick in the new lamp, assemble the
lens.
CAUTION
Overtightening the screws may cause
the lens to crack.
◉ ◉ BRAKE / TAIL LAMP
1. Remove the rear seat.
To remove the rear seat, insert the igni-
tion key into the lock and turn it clock-
wise.
2. Turn the socket to the counter-clockwise
and pull it out at the lamp housing.
3. Push the bulb, turn it to the counter-
clockwise, and pull it out.
4. To fit the replacement of bulb, push it
in and turn it to the clockwise while
pushing.
◉ ◉ LICENSE PLATE LAMP
1. Remove the socket under the rear fend-
er.
2. Push the bulb, turn it to the counter-
clockwise, and pull it out.
3. To fit the replacement of bulb, push it in
and turn it of to the clockwise while push-
ing.
Overtightening the screws may cause
the lens to crack.
76
CAUTION