Brake Pads - HYOSUNG GT 650 EFI Owner's Manual

◉ ◉ BRAKE PADS
Inspect the front brake pads by nothing
whether or not the friction pads are worn
down to the grooved limit line. If a pad is
worn to the grooved limit line it must be
replaced with a new one by your authorized
Hyosung dealer or qualified service
mechanic.
[Front Brake]
[Rear Brake]
Limit line
Inspect every day in the following point at
the brake system.
①
Brake fluid leakage of the front and rear
brake system.
②
Leak or damage of the brake hose.
③
Operating of the brake lever and pedal.
④
Wear of the front and rear brake pads.
The front and rear brake system be
replaced the brake hose or the brake
fluid according to periodic inspection
chart by your authorized Hyosung deal-
er for safety as in times of operating at
high pressure.
Riding with worn brake pads will reduce
braking performance and will increase
your chance of having accident. Inspect
brake pad wear before each use. Ask
your Hyosung dealer or qualified
mechanic to replace brake pads if any
pad is worn to the limit.
After replaced the front or rear brake
pads, the brake lever and pedal pull and
release several times so that it is setting
at the original place.
Then, do not ride the motorcycle untill
operating the brake fluid and becoming
the brake distance.
70
CAUTION
WARNING
CAUTION