『
are delivered from the factory on position
�.
WARNING
When adjusting the footrest position,
the 6mm hexagon bolts be torqued to
the proper specification.
If they are not, the footrest can come off
unexpectedly.
Tighten Torque
Footrest mounting
bolt
◉ ◉ GEARSHIFT LINK ROD
(FOR 『 『
『 『
PARTS)
When the footrests in position � ,
exchange the gearshift link rod for appropri-
ate riding position.
● ● Position � � or � �
: Install the gearshift link rod ③
● ● Position � �
: Install the gearshift link rod ④
』&『
2.2 ~ 3.5 kgf ∙ m
(22 ~ 35 N∙ m)
』 』 &
』 』 's OPTIONAL
』
�
The gearshift link rod ④
side stand ignition interlock system.
If the transmission is in neutral or side stand
up, you can only start the engine with pulling
the clutch lever.
This side stand ignition interlock system pre-
vents the motorcycle from being started with
side stand down.
39
�
[Optional parts]
is optional parts.
SIDE STAND
are equipped with the