CLUTCH CABLE ADJUSTMENT
At each maintenance interval, adjust the
clutch cable play by means of clutch cable
adjuster.
The cable play should be 2 mm (0.08 in)
as measured at the clutch lever holder
before the clutch begins to disengage.
�
�
『 『
『 『
『 『
『 『
�
�
�
』 』 &
( ( S S t t a a n n d d a a r r d d t t y y p p e e ) )
�
�
』 』 &
( ( S S p p o o r r t t s s t t y y p p e e ) )
』 』
①
The clutch lever play
②
The lock nut
③
The clutch lever adjuster
④
The rubber boot
⑤
The cable adjuster
⑥
The clutch cable adjuster lock nut
If you find the play of the clutch incorrect,
adjust it in the following way :
◉ ◉ CLUTCH CABLE ADJUSTMENT
● A basis adjustment be allowed by the
clutch lever adjuster ③ .
● Loosen the clutch lever adjuster ③ .
● Screw the lock nut ②
after finishing adjustment.
● After end of adjustment, tighten the lock
nut ②
● If not adjust by the adjuster ③ , loosen
the clutch cable adjuster lock nut ⑥ .
● Turn the clutch cable adjuster ⑤
out to acquire the specified play.
● After end of adjustment, tighten the lock
nut ⑥ .
● The clutch cable should be lubricated
�
with a light weight oil whenever it is
adjusted.
Clutch cable play ① ①
』 』
65
clockwise fully,
and cover the rubber boot ④ .
2 mm (0.08 in)
in or