FRONT FORK
The standard settings of front forks are
selected to meet various riding conditions
such as low to high motorcycle speed and
light to heavy load on the motorcycle.
The front forks settings can be adjusted
for your preference and fine-tuning.
◉ ◉ DAMPING FORCE ADJUSTMENT
�
�
Softer
Solo
Standard
riding
Stiffer
Dual riding
STANDARD FRONT FORK DAMPING FORCE
Rebound
Turn to "S" direction
3 clicks out from end of "H" direction
Turn to "H" direction
3 clicks out from end of "H" direction
The rebound and compression damping
force can be individually adjusted by turn-
ing the respective adjusters. The rebound
damping force adjuster ①
top of the front fork. The compression
damping force adjuster ②
bottom of the front fork.
To adjust the damping force turn in the
adjuster fully for "S" or "H" direction.
Count the number of clicks from the fully
turned-in position.
Fully turned-in "H" direction provides
stiffest damping force and turning "S" direc-
tion the adjuster will soften damping force.
The rebound and compression damping
force is set on "Solo riding standard (refer
to below chart)" position at the factory.
Be sure to adjust the damping force on
both front forks equally. Setting one
front fork harder than the other will inter-
fere the stability of the motorcycle.
2 clicks out from end of "S" direction
42
is located at the
is located at the
WARNING
Compression
Turn to "S" direction
End of "S" direction
Turn to "H" direction