Replace Of The Lamp; Drive Chain - HYOSUNG GV250 User Manual

WARNING
A hot muffler can burn you. The muffler
will be hot enough to burn you for some
time after stopping the engine.
Wait until the muffler cools to avoid
burns.
4. Loosen the drive chain adjuster ③ , left and
right, and disengage the drive chain from the
rear sprocket.
5. Remove the rear break hub from the swing
arm.
6. Loosen the rear shock absorber lower bolt ④ ,
left and right, draw out the rear axle with the
rear wheel push to the bottom.
7. Pull the rear wheel assembly rearward.
8. To replace the wheel, reverse the complete
sequence listed.
CAUTION
The standard tire on
110/90-16 59S for front, and 150/80-15M/C
70S for rear.
The use of a tire other than standard may
cause trouble. It is highly recommended
to use the standard tire supplied by
Hyosung.

REPLACE OF THE LAMP

Requirement electric power of the lamp is fol-
lowing the chart.
When replace the damaged lamp, always use
the equal capacity.
The use of a lamp other than rules may cause to
excessive at the electric system or to damage
the lamp.
NAMES
Head lamp
Position lamp
Brake / Tail lamp
Turn signal lamp
License lamp
37
CAPACITY
HI 35 W
LO 35 W
5 W
21/5 W
10 W
5 W
is