Table of Contents
Advertisement
Editing the HDR image
Rotate, resize, crop, or save the HDR image. The Operations tab lets you make
further adjustments to the HDR image. This is also where you can save the image
as an HDR image file to retain the full tonal information of the image.
To edit the HDR image:
1. Click the Operations tab.
2. Edit the image by using Rotate,
Resize, or Crop.
• Rotate Click a button to rotate or
flip the image.
• Resize Enter the Height and
Width value you want to resize the
image to. Click Apply to resize the
image.
• Check Crop then drag on the
image to create the crop selection.
You can also choose a preset size from the drop-down list. Click Apply to
crop the image.
Tips:
• Click Resize lock to keep the aspect ratio when resizing or check Use aspect
ratio when creating the crop selection.
• Click Reset to revert the image back to its original state before any
adjustments were applied.
3. Click Save to save the image as an HDR file (HDR). This lets you open the HDR
image in the future if you need to optimize it again.
4. Click OK to open the edited image as a new document in the workspace.
SmartRemove
SmartRemove lets you remove unwanted objects or areas from at least two
images of the same scene. You can even expand your creativity by preserving and/
or deleting particular objects or areas.
To use SmartRemove:
1. Open at least two EXIF images of the same image size, aperture, shutter speed,
and ISO values.
CHAPTER 2: PHOTO EDITING 97
Advertisement
Table of Contents
