Ulead PHOTOIMPACT 11 User Manual page 158

Table of Contents

Advertisement

158 ULEAD PHOTOIMPACT USER GUIDE
To make a Two-color gradient fill:
1. Click Fill in the Toolbox and select
any of the gradient fill tools (except
Texture Fill).
2. On the Attribute Toolbar, click Fill
method and select Two-color.
3. Select the start and end fill colors in
the Fill colors color squares.
4. Click the point where you want the fill
to start, and drag the mouse to the
point where you want it to end, then
release.
Note: If you are using the Linear
Gradient Fill Tool, press [Shift]
while dragging to constrain the fill
to a certain angle. If you are using
the Rectangular and Elliptical
Gradient Fill Tools, press [Shift]
to create a square and circular fills
respectively.
To apply a Multiple-color gradient fill:
1. Click Fill in the Toolbox and select any of the three gradient fill tools. Change
the Fill method to Multiple- color gradient fill.
2. Click the Fill colors color square. The Palette Ramp Editor dialog box opens
with the palette library displaying thumbnails of color rings.
3. Select a color ring on the thumbnail displayed. Right-click a specific control
point to adjust the color of the ring and select Change Color. Click OK.
Tips:
• Enter a value from 0 to 359 in Hue shift to adjust the hue settings.
• Enter a value from 0 to 359 in Ring to adjust the rotation of the color ring.
4. Click the point where you want the fill to start, and drag the mouse to the point
where you want it to end, then release.
Note: To save your customized palette ramp for later use, click Add
ramp then appears as a thumbnail in the Palette Ramp Editor dialog box.
.
Your palette

Advertisement

Table of Contents
loading

Table of Contents