Table of Contents
Advertisement
72 ULEAD PHOTOIMPACT USER GUIDE
3. Click the Desired color square to open the PhotoImpact Color Picker dialog
box to specify the replacement color (right-clicking opens the Color Picker
pop-up menu).
Tip: To simultaneously apply the new settings to the image in the workspace, select
Real-time preview.
4. Click the spot on the image that you want to change (the Pointer changes into
the Eyedropper Tool when you move the mouse over the image).
5. Click OK.
Preset tab
To adjust color cast:
1. Select Photo: Color - Color Cast.
2. Pick a color from the Before View that should be the neutral tone (an area that
should be pure white, gray or black but is not, because of the color cast). The
cursor changes to the color picker when it moves over the source image.
3. After selecting a color, a reference point (represented by an "X") appears on the
color wheel. The color wheel has a maximum of 100% saturation for each color
at the edge of the circle, with neutral gray at the center (where red, green, and
blue values are equal).
4. To adjust the color cast, pick another color from the Before View, drag the
rectangular control point, or change hue and saturation.
Smart tab
Advertisement
Table of Contents
