Advertisement
Quick Links
®
Ulead
HD Plug-in 2.0
®
Ulead
HD Plug-in 2.0 is a plug-in for Ulead MediaStudio Pro 7
that allows you to capture, edit and output HDV or HD video.
Using Ulead MediaStudio Pro 7's advanced video editing tools,
you can natively edit high-definition 1080i and 720p as well as
other formats including MPEG-2. After editing the video, you
can save it as a video file or record it back to the HDV/HD
camcorder.
This plug-in currently supports the following Sony and JVC
high-definition camcorders and VTRs:
• Sony HVR-Z1
• Sony HDR-FX1
• Sony HVR-M10N
• JVC GR-HD1
• JVC JY-HD10U
• JVC GR-PD1
• JVC GR-PD1EK
System requirements
• Microsoft
®
• Intel
Pentium® 4 3GHz (recommended) or higher with
Hyper Threading technology
• 1GB DDR RAM
• Firewire (IEEE-1394) controller for connection to the
HDV/HD camcorder
®
®
Windows
XP with Service Pack 2
1
Advertisement
Related Manuals for Ulead MEDIASTUDIO PRO 7.0 - HD PLUG-IN 2.0
Summary of Contents for Ulead MEDIASTUDIO PRO 7.0 - HD PLUG-IN 2.0
-
Page 1: System Requirements
HD Plug-in 2.0 ® Ulead HD Plug-in 2.0 is a plug-in for Ulead MediaStudio Pro 7 that allows you to capture, edit and output HDV or HD video. Using Ulead MediaStudio Pro 7's advanced video editing tools, you can natively edit high-definition 1080i and 720p as well as other formats including MPEG-2. -
Page 2: Installing The Plug-In
Installing the plug-in You need to have Ulead MediaStudio Pro 7 installed on your computer before you can install the plug-in. To install: 1. Insert the installation CD into your disc drive. 2. Use Windows Explorer to locate the setup.exe file. Double- click the file to install the plug-in. -
Page 3: Before Capturing
you create a video file, be it a preview or the final sequence, only the clips which have been altered will be rendered. Before capturing Before capturing your HDV or HD video into Video Capture, make sure that your camcorder (or deck) is properly detected by your computer. - Page 4 On JVC HD camcorder If you have connected your JVC HD camcorder before to your computer, check the Device Manager to see if your camcorder is detected as a DV device (left image below) or JVC tape device (right image below). DV mode MPEG-2 mode If the camera is detected as a DV device, follow the procedure...
- Page 5 To switch the JVC HD camcorder to MPEG-2 mode: 1. Turn on your camcorder and flip open the camcorder's LCD monitor to reveal the camera panel. In the camera panel, switch i.LINK OUT to DV and switch off your camcorder. 2.
- Page 6 Capturing HDV/HD video using Video Capture Use MediaStudio Pro's Video Capture to capture the video from your camcorder into your computer. To capture videos: 1. Connect your HDV or HD camcorder to your computer's IEEE-1394 port using the IEEE-1394 cable. 2.
- Page 7 Notes: • To check if your HDV/HD camcorder has been detected, select Setup: HDV MPEG Capture Plug-in. You will see the name of the camcorder in the menu. • To check if the proper capture plug-in and device control are being used, select Setup: Switch Capture Plug-in/ Device Control.
- Page 8 3. Import your HDV or HD video files into the Library. 4. Drag each video file to the video track, Va or Vb, on the Timeline. 5. Apply transitions, overlays, video filters, titles, and audio filters to your video project. Tip: You can preview your project simultaneously on your computer monitor and an external display device if you have a dual head display card.
- Page 9 Note: You can also choose to export the video in other formats such as DVD-compliant MPEG-2 or DV. 3. Click Template and select an HDV or HD template from the pop-up menu, depending on how your video was encoded (HDV, HD or SD). Note: If you want to record the video file back to the HDV or HD camcorder, select a transport stream template.
- Page 10 Recording video back to the Sony HDV or JVC HD camcorder After editing, you can export your HDV video back to your Sony camcorder or record your edited HD video to your JVC camcorder. To record back to the camcorder: 1.
- Page 11 You can view the video being recorded on your camcorder's LCD monitor but not on the Preview Window. Tip: Click Transmit to preview the video first on your camcorder's LCD monitor before you record the video to your camcorder. 6. Click Finish when you are done recording the video to your camcorder.