118 ULEAD PHOTOIMPACT USER GUIDE
Step 2 of 4: Extracting the object
Define the area of the image you want to extract.
To extract the object:
1. Click the area outside the
boundary of the subject you want
to retain to remove it. You will
notice that the area outside the
boundary becomes a checkerbox.
2. Click Next.
Tips:
• Click Invert to switch the selection
to the unselected areas.
• Click Reset to revert to the
original state.
Step 3 of 4: Adjusting degree of extraction
Set the detailed level of extraction.
To adjust the extraction degree:
1. Adjust the Extraction Detail
slider. The higher the value, the
more details are selected when the
object is extracted.
Note: It is recommended to set the
Extraction Detail to a high
value if the boundary you
created contains details that
are subtle but you want
selected (e.g. hair strands).
However, the higher the
Extraction Detail value, the
longer it will take to process.
2. When satisfied with the results,
click Next. If you do not need to
refine the object, click OK.