Table of Contents
Advertisement
Tip: You can also right-click the object and select Convert Object Type - From
Text/Image to Path.
2. Click the Transform Tool.
3. Select Rotate in Virtual 3D in Transform on the Attribute Toolbar. 3D
Virtual Track Ball appears with a focal point at its center named Object Center
(also the Projection Center).
4. Drag the object to rotate in 3D space.
Tip: Double-click the Object Center to
change it to Projection Center.
Double-click again to change it back
to Object Center.
Notes:
• Moving the Object Center relocates its
object handle, thus moving the entire
image but retaining the Projection
Center in its original position.
• When you see a round path with a focal
point at the center, that is the Object
Center and dragging anywhere within
it transforms your object in a three-
dimensional effect. When you see two
rectangular paths around your image
with a focal point at the center, you are
in the Projection Center mode.
Moving the handles lets you change
your viewing angle of the object.
• The viewing angle is limited between 0
and 90 degrees.
CHAPTER 3: SELECTIONS & OBJECTS 143
Drag the object to rotate it.
Object Center mode
Projection Center mode
Advertisement
Table of Contents
